This site is not for children. Are you over 18?
Price range: $99.99 through $119.99
All the hardware you need to build a Turkey Vulture/Ranch Vulture. You supply the gun parts and plastic.
SCS side plates are pre tapped on the left side and ready to install. as always with SCS parts there are sharp edges, so use caution and clean up any sharp spots first
If you add the mag push stock, a large Allen key will be supplied with the hardware for the stock
| Exact Part | Count |
| M3-35mm | 8 |
| M4-35mm | 3 |
| 1x m3 heat set insert | 1 |
| M3 x 20mm | 2 |
| M3-30 | 1 |
| M3 nut | 3 |
| M4-20 | 2 |
| M4 nut | 2 |
| M5-25 | 1 |
| M5 square nut | 1 |
| 1x ball point pen spring | 1 |
| SCS Parts | |
| Lever | 1 |
| Left side cut and tapped | 1 |
| right side | 1 |
| front trunion | 1 |
| Turkey Vulture extra HW | |
| 5/16″-18 locknut | 1 |
| M3 x 20mm | 4 |
| m4 x 8mm | 1 |
| Magpush Stock hardware | |
| M4 x 5mm Bolt | 5 |
| 5/16-18 x 1.25″ Bolt | 7 |
| 1/4″ hex key | 1 |
| Optional Throw Adjustment | |
| 5/16-18 x 2.5″ Bolt | 3 |
| Weight | 1.5 lbs |
|---|---|
| Dimensions | 11 × 1.5 × 3 in |
| Style | Turkey Vulture, Ranch Vulture |
Reviews
There are no reviews yet.